Clear Filters
Part Types
Categories
Brands
application notes
- Cast iron or aluminum heads (4)
- Cast iron or aluminum heads - Suitable for marine applications (3)
- Cast iron or aluminum heads - Extra large bore - Not recommended for Eng. bores 4.625" or larger (1)
- Cast iron or aluminum heads - Extra large bore - Not recommended for Eng. bores 4.625" or larger - Suitable for marine applications (1)
- Cast iron or aluminum heads - Used in Sportsman drag race and flat top piston oval track categories (1)
combustion chamber volume (cc)
+ See All- See Lesscombustion seal design
engine displacement
gasket sealant included
grade type
material
materials/construction
part type
product notes
- Can be used on 400 race Engs.; Can be used on aluminum blocks w/liners; Minimal brinelling of aluminum heads (2)
- Fits Gen IV pass. car and H/P block; Fits Gen IV truck and Bow Tie block; Does not fit Gen V block; Does not fit Gen VI block; Two coolant holes per end; Three lower coolant holes; Minimal brinelling of aluminum heads (2)
- Fits Gen IV pass. car and H/P block; Pre-1971 blocks may require modification; Fits Gen IV truck and Bow Tie block; Fits Gen V block; Fits Gen VI block; One coolant hole per end; Three lower coolant holes; Minimal brinelling of aluminum heads (2)
- Can be used on 400 race Engs.; Steam holes for 400 Engs.; Street use; Can be used on aluminum blocks w/liners; Minimal brinelling of aluminum heads (1)
- Do not use on 400 Engs.; Can be used on aluminum blocks w/liners; Minimal brinelling of aluminum heads (1)
- Do not use on 400 Engs.; Do not use on aluminum blocks w/liners; No brinelling of aluminum heads (1)
- Extra thick to reduce compression and correct piston-valve clearance problems; Can be used on 400 race Engs.; Steam holes for 400 Engs.; Street use; Can be used on aluminum blocks w/liners; Minimal brinelling of aluminum heads (1)
quantity